realtek pcie fe family controller issues

If it still doesn’t show 1.0 Gbps, it means that it isn’t supported by your adapter or router. Note: If the “ 1.0 Gbps” option isn’t listed try the second solution. Selecting the maximum supported speed by the adapter In the “ Value” dropdown select the “ 1.0 Gbps Full Duplex” option.In the “Properties” list, click on the “ Speed and Duplex” option.Click on the “ Configure button” and select the “ Advanced” Tab.Note: The adapter in use should have “ Green” signals. Right-clicking on the connection and selecting “Properties”

Right-Click on the adapter that you are using and select “Properties”.ncpa.cpl Typing in “ncpa.cpl” and pressing “Enter” Type in the following command and press “ Enter“.Press “Windows” + “ R” to open the run prompt.Since the adapter needs to be configured to run at the maximum provided bandwidth, in this step, we will be changing some settings to support the maximum speed. Make sure to implement these in the specific order in which they are provided. Now that you have an idea of the nature of the problem, we will move on towards the solutions. If it doesn’t, the connection will run at the maximum speed that the adapter supports. Unsupported Adapter: It is vital that the adapter on your computer supports the speed exhibited by the router.

If the Ethernet cable is low grade, it won’t support the maximum bandwidth offered by the adapter.

Unsupported Ethernet Cable: It is important that the ethernet cable that you are using is capable of supporting the speed that you require on your computer.

It is important to configure the Advanced Adapter settings and allow the adapter to run at full speed.

Wrong Configuration: It is possible that the settings for the network adapter aren’t configured properly due to which the adapter is limited from achieving the full potential.

Realtek pcie fe family controller issues